Alton VICTORIAN OAKHAM, Instruction Manual

Page: 33 / 64

33
Roof Assembly
7
Diagram 45
Now the ridge is in place you can install the roof bars. Slot the bar into the ridge first, the tenon may
be a little tight so this might require a tap with a wood or rubber mallet. Once this has located
correctly locate the bottom of the bar with the trench in the eaves bar. This again may require some
persuasion to get this to drop into place. Once the bar is fitted at both ends drill a pilot hole at the
top of the bar as shown in diagram 45. This again should be drilled off centre as the roof corner bars
were in diagram 41. Now fix with an 80mm screw. Don’t fix the bottom until all the roof bars are in
place.
Ridge
Bar
EV
047
8
Dia. 45
External
Roof
Part Name Part
Number
Qty
Ridge: 6ft 8ft 10ft 12ft
6ft long EV0444 1
8ft long EV0445 1
10ft long
EV0446 1
12ft long EV0447 1
Roof Bars EV0477 4 6 8 10
Eaves Bracing EV0537M 4 6 8 10
Ridge Bracing
EV0538M 2 3 4 5