47
Roof Vent Installation
17
Take the vent frame that is ready
assembled and fix the vent hinge to one
end through the 4 pre drilled holes
using the 19mm screws, diagram 120.
Once this is in place fix the plastic vent
filler (EV0323) also with a 19mm screw,
its is
important
to make a pilot hole
before fixing the plastic filler to prevent
splitting.
Now take a 610mm x 469mm pane of
glass and locate this in the vent hinge.
Before lowering this down completely
slot the glass stops onto the open edge.
EV03
15M
EV0323
EV1106M
(Cedar capping part number: EV1110)
Diagram 120
When in position you can fix the glass in
place with the vent capping (either cedar
or aluminium) using the 25mm screws,
diagram 121. Remember if you are using
the aluminium capping system you will
need to insert the rubber seal before fixing
it in place.
Diagram 121
External
External
610
X
469
610
X
469
EV0313M
Rubber seal
Diagram 119
Dia. 120
Dia. 121
Summary of Contents for Evolution Octagonal 9x6
Page 1: ...1 04 19...
