Alton Evolution Eight Series, Instruction Manual

Page: 27 / 52

27
Dia. 24
9
Install the rear glass in the same
method as the side glass, the only
difference is you have to stack the
shaped panes on top using the glass
separators. Make sure you have all
the glass to hand when you are
glazing this section. It is also a good
idea to have an extra pair of hands to
hold glass in place while you get the
next section of glass in place. Always
keep the glazing capping flush to the
aluminium base level with the
bottom of the glass.
Once the vertical capping is on you
can fit the roof corner cloaking strips.
These are handed as they have
glazing beads already attached to
them to secure the shaped panes
along the top edge, so make sure you
have the correct one (see page 28 for
a guide).
Glazing
40m
m Sc
rew
EV
00
47
Glass retaining
bead
Diagram 24
EV
00
47
Eaves Bar
External
External