Neptune_GB_Ver.2.0 10/03
_
6.
Service / Repair
Kenney
C3 Cylinder head 2
Mounting of textile sleeves by means of
tool P/N 1220090. It is an advantage if
the sleeves have been in a water bath for
3-4 hours before mounting them. Do not
forget to blow through the ducts and
grease all sleeves before mounting.
Don’t scratch the brass cylinder head
when removing the old HP sleeves!
33.
Duct
Duct
Pic. 6.3:
Mounting pressure sleeves
Thrust collar (5)
Back-up ring (7)
LP-sleeve “rubber” (6)
HP-sleeve “textile” (3)
O-Ring (1)
Nylonring (2)
Back-up ring (4)
Suction valve
Pressure valve
1
2
3
4
5
6
7