Alto MX-30, User Manual, Page: 8 / 16

CHANNEL 2
MIN MAX
BASS
MIDDLE
TREBLE
GAIN
-30dB +15dB
-30dB +15dB
-30dB +15dB
PHONO
LINE
LINE
6
3.1.1 The CHANNEL Section
-. PHONO-LINE to LINE Switch 2
This switch is available on input channel 2 and channel 3.
You should use the LINE position for all high level audio
signals such as CD Players, DAT, MD, etc.. You should use
the PHONO-LINE position to connect the turntables making
sure that the PHONO-LINE switch on the rear panel is on
PHONO position. With this switch (the one on the rear panel)
on LINE position, the Input Channel will accept a high level
audio signal.
-. GAIN Control
Via this knob you will adjust the input level. Do not turn this
control too much clockwise or you will overload the channel
and do not turn it too much counterclockwise or you will
generate background hiss.
CHANNEL 1
MIN MAX
BASS
MIDDLE
TREBLE
GAIN
-30dB +15dB
-30dB +15dB
-30dB +15dB
PFL
PHONO
LINE
MIC
-. PFL Button 8
Engage this button to route the input signal of corresponding
channel to PFL section, and the corresponding LED illuminates.
-. PROGRAM Fader 7
There is a program fader available on each input channel.
These faders are used to adjust the overall level of the input
channels.
-. MIC to PHONO-LINE Switch
The channel 1 is equipped with the MIC to PHONO-LINE
switch. This switch is used to select microphone input and
phono/line Input. When it is in the right position, you can
use the PHONO/LINE switch on the rear panel to input the
line signal to the phono input connector.
1
-. EQUALIZER Control
4 5 6
Each input channel is provided with 3 bands equalizer:
Treble
, Middle and Bass , and you can adjust
the gain range of each from -30dB to +15dB.
1
3
4
5
6
8
7
2
3