Alto MX-30, User Manual, Page: 12 / 16

10
29
30
3.3.5 EFFECTS Send and Return
You can send the PFL signal through the SEND sockets to a signal processor such as reverb, equaliser,
etc.. Then from the same effect unit you bring the signal back into the MX-30 via the RETURN sockets
and the audio signal is routed into the MAIN output.
32
33
31
3.3.6 INPUT
- PHONO input : The three Channels feature PHONO inputs including RIIA preamplifier for turntable. PIN
(RCA) jacks shall be used to connect the turntable.
- LINE input : Through these RCA type sockets you can connect a CD player, an MD player or any other
high level device such as Tape Recorder, DAT, etc..
Important Notice: If you wish to connect LINE level devices into the LINE/PHONO input, make sure that the
LINE/PHONO switch is on LINE position otherwise the sensitive RIAA preamplifier built-in in the Phono
input will be overloaded and will produce distortion.