4
HOOK
UP
2. QUICK START - ACTIVE SPEAKER CABINETS
Active, two subwoofers & two satellite speakers.
In this example, the mixer is
connected to the ELVIS MKII subwoofers and then a 125 Hz covered line signal
is sent to the respective satellites. In this way, the high energetic content of
the low frequencies is limited to the subwoofer and the satellite' s woofer act
like a mid -woofer. As a consequence the satellites built-in amplifier is not
stressed by low frequency content.
1). Connect one side of signal cable at your mixer into Main Output Left/Right
(with1/4" Jack or XLR) and the other side of the cable into the Left/Mono
Input (COMBO) of the ELVIS MKII active subwoofers; with the second signal
cable connect the Left/Mono Line Output of the subwoofer (Stereo/Mono-
Jack or XLR) to the Line input (COMBO) of the active satellite (with Stereo
- Jack or XLR).
2). Connect the power cord to mains.
3). Turn on your mixer first, then the active speaker cabinets.
4). Turn up the volume control of the active speaker cabinets.
5). Use PFL function to get the proper input level for the mixer, and adjust the
Main Mix Level control to manipulate the output level.
6). After use, turn off your active speaker cabinets first, then the mixer.
ELVIS MKII SUBWOOFER
LINE IN
LINE OUT LEFT/MONO
MAIN OUT LEFT
MAIN OUT RIGHT
LINE IN LEFT/MONO
LINE IN LEFT/MONO
MIXER
LINE IN
LINE OUT LEFT/MONO
ELVIS MKII SUBWOOFER
