
8
3.1.5 The BPM Section
TIME OFFSET
TEMPO DIFFERENCE
BEAT ASSIST
BEAT ASSIST
TIME OFFSET
TEMPO DIFFERENCE
BEAT ASSIST
BEAT ASSIST
21
23
24
22
25
CH 2
CH 3
This is a key and exclusive function in your DJM 4 mixer. What is the Beat Per Minute function/ It simply indicate
the "speed" of the music through a 3-digit display. The beats (per minute) of the music are automatically measured
by the BPM and then displayed on the 3-digit display. Of course the two BPM counters are available for CH 2 and
CH 3. Thanks to the BPM function you can mix more quickly songs with different tempo.
-. The TEMPO Display
This 3-digit display will show the tempo of CH 2 and CH 3. If the tempo changes the display will change accordingly.
21
-. The BEAT ASSIST switch
22
-. TIME OFFSET Led segment
24
-. TEMPO DIFFERENCE Led segment
This 7 segments Led Meter will indicate the difference in
between the CH 2 and CH 3 or programs. If
tempo
the tempos on both channels are the same, the center LED will light. If the tempo of the music on channel 2 is
faster, the LED's on the left will start to light and vice-versa.
23
-. The CROSSFADER
25
This 7-segment Led Meter is positioned immediately below the Tempo Difference display. This display will in-
dicate the synchronicity of the CH 2 and CH 3. When the two channels are synchronized, the center LED will
light. If LED's on the left will start to light, Channel 2 is getting out of sync and vice-versa.
The Beat Assist button is available for CH 2 and CH 3 and it is below the Tempo display. Press the Beat Assist
button and you can manually regulate the beat. The Led nearby the Beat Assist button will show you whether
the function is active or not.
Through this crossfader you can fade in between CH 2 and CH 3. The Crossfader on your DJM 4 is VCA (Vol-
tage Control Amplifier) controlled and it is User replaceable.