Alto CONTROL30, User Manual, Page: 9 / 33

8
Select the memory location (Empty or already occupied from a previous user's preset) where to store the
new user's preset using buttons. UP/DOWN
Equ Setup
This function allows the user to select the type of EQ to be used:
Graphical 2x15 Dual Mono (15 filters per channel)
This is a graphical EQ (fixed Q and frequencies) with independent settings for each channel. When this type
of EQ is selected, only a channel a time can be edited. To select the channel to be edited, click the
key EDIT
and select Channel item.
Parametric 2x15 Dual Mono (15 filters per channel)
This is a parametric EQ (variable Q and frequencies) with independent settings for each channel. When this
type of EQ is selected, only a channel a time can be edited. To select the channel to be edited, click the
EDIT
key and select Channel item.
Graphical 2x15 Stereo (15 filters per channel)
This is a graphical EQ (fixed Q and frequencies) in which both channels share the same settings. When this
type of EQ is selected, both channels are simultaneously edited. If the
key is pressed and Channel item EDIT
is selected, the parameter shows LNK (linked) and cannot be changed.
Parametric 2x15 Stereo (15 filters per channel)
This is a parametric EQ (variable Q and frequencies) in which both channels share the same settings. When
this type of EQ is selected, both channels are simultaneously edited. If the
key is pressed and Channel EDIT
item is selected, the parameter shows LNK (linked) and cannot be changed.
Graphical 1x30 Mono (30 filters / one channel)
This is a graphical EQ (fixed Q and frequencies) with 30 filters on one channel. When this type of EQ is selected,
only a channel works and can be edited. If the
key is pressed and Channel item is selected, the parameter EDIT
shows LNK (linked) and cannot be changed.
Parametric 1x30 Mono (30 filters / one channel)
This is a parametric EQ (variable Q and frequencies) with 30 filters on one channel. When this type of EQ is
selected, only a channel works and can be edited. If the
key is pressed and Channel item is selected, the EDIT
parameter shows LNK (linked) and cannot be changed.
Once terminated the sequence above, on the display will appear the name of the selected preset and the sys-
tem will go back to the main menu.
Store Preset : This function allows the storing on one of the 60 available memory locations the modified (using
the Editing Menu) user's preset, starting from one of the 64 available factory presets.
To Store a Preset:
Select "Store Preset" using buttons. UP/DOWN
Press button to access the further sub menu. ENTER
To Load a Preset:
Select "Load Preset" using buttons. UP/DOWN
Press button to access the further sub-menu. ENTER
Select the chosen preset using buttons. UP/DOWN
Press to load the preset or press button if you decide not to load the preset. ENTER ESC
If you want to give up, press to go back to the main menu without storing the new preset, otherwise, ESC
press to store the new preset. The user can choose the identification name for the new preset ENTER
using 6 characters max. The blinking character will be modified using the buttons. When choosing UP/DOWN
the character, press to confirm and go to the next one. Pressing ENTER ESC before the 6 character, the
th
old name will be maintained as name of the new preset. Pressing ENTER
as confirmation of the 6 character,
th
the new preset will be stored with the new name. There is no possibility
to correct a confirmed character, if
necessary to change again the name, repeat the storing process from the beginning.
Once terminated the sequence above, on the display will appear the name of the new stored preset and the
system will go back to the main menu.