1-30
American-Lincoln Technology
ATS 46/53 Troubleshooting Guide
MAIN & SIDE BROOM CIRCUITS (GAS & DIESEL)
MAIN AND SIDE BROOM CIRCUITS
Conditions necessary for circuits to work
1.
Battery Voltage
2.
Key switch in on
3.
CB-6 closed
4.
Hopper switch closed (HOPPER DOWN)
5.
Main broom switch closed
6.
Side broom switch closed
7.
Good ground on solenoids (2) Main Broom (5) Side Broom
Start at main broom solenoid (2) and work your way back through main broom switch, CB-6 to key switch.
For side broom start at solenoid (5), then work your way back through side broom switch, main broom switch
and CB-6 to key switch.
Note
When main broom solenoid (2) is energized solenoid (11) blocking solenoid is also energized. Solenoid (11)
holds hopper door open or opens it when main broom is down and running.
12V BATTERY
KEY SWITCH
15 AMP.
15 AMP.
BAT.
CB-6
CB-5
H0-SW.
(C) (NO)
MAIN
BROOM
SW.
SIDE BROOM SW.
(NC) HELD OPEN
WITH BROOM UP
MAIN BROOM SOL. (2)
BLOCKING SOL. (11)
SIDE BROOM SOL. (5)
4A,4B
23
50
25,26
26,50
7V,7W
7U,7V
7P,7Q
24
25
27
24,24A
4
4,4A
9A
1,1A,1D,9
1108
