XCELERATE SERVICE INSTRUCTIONS • XLSERVICE • 25.
w w w . a l t o - s h a a m . c o m
|
8 0 0 - 5 5 8 - 8 7 4 4
|
2 6 2 - 2 5 1 - 3 8 0 0
Xcelerate™ Hi-Speed Oven
RESET HIgH LImIT SWITCH
Xcelerate has a safety overheat protection switch, which reliably cuts the power to the heating element in case of
overheating.
The mechanical construction of this part is very sensitive and can be triggered by vibration from transport. Vibration can
also partially trigger the switch causing it to fully trigger after the first few days of operation.
When the high limit protection switch is tripped it can cause the oven to stop heating. A reset can easily be done.
STEP 1
Wait for the oven to cool down a few minutes. The
overheat protection switch is located at the back on the
bottom of the oven under a protection cover. Remove the
cover.
STEP 3
Please reinstall the safety cover. The oven is now ready to
use.
Over time, a dirty filter might be the cause of overheating.
Should you have to reset the oven more often without
obvious reason, please contact your service agent or
Alto-Shaam.
STEP 2
Press the red reset button firmly. Quite a bit of strength
is needed to push it correctly. The reset can be felt as a
“click”.
