XCELERATE SERVICE INSTRUCTIONS • XLSERVICE • 8
w w w . a l t o - s h a a m . c o m
|
8 0 0 - 5 5 8 - 8 7 4 4
|
2 6 2 - 2 5 1 - 3 8 0 0
STEP 9: ChECK ThE SWITChING SEqUENCE
Open and close the door very slowly, so you hear the ‘click’ noise of the switches three times. Also watch the
switches.
STEP 8: CONTINUED
Xcelerate™ Hi-Speed Oven
CHANgE DOOR SWITCH
When closing the door S2 must ‘click’ first, after that S1 and S2 should ‘click’.
S2 is the safety switch. If S2 does not switch before S1 and S3 switch (‘click’), a short circuit will occur and circuit
breaker F1 will trip. This mechanism is an international standard that disables microwave operation if there is a
malfunction of a switch or the adjustment is not correct.
If this type of short circuit occurs more than two or three times, switch S2 is likely damaged and must be replaced
again.
When you are sure the switch activation sequence is correct, you can apply power to the oven. Place a glass of water
in the oven, start a cooking sequence that includes the use of microwave power and slowly open the door. If all works
fine, open the door quickly. If the adjustment is correct the oven will work normally. If F1 trips while opening the door,
check the switches again. Always disconnect the main power plug when working on the door switch!