background image

O R I G I N A L E Q U I P M E N T L I M I T E D WA R R A N T Y

®

C O M B I T H ER M

G A S C O M B I T H E R M

—  

O P E R A T I O N A N D C A R E M A N U A L

#MN-28676

PG

. 29

Alto-Shaam, Inc. warrants to the original purchaser that any original part that is found to be defective in material or

workmanship will, at Alto-Shaam’s option, subject to provisions hereinafter stated, be replaced with a new or rebuilt part.

The labor warranty remains in effect one (1) year from installation or fifteen (15) months from the shipping date,

whichever occurs first.  Alto-Shaam will bear normal labor charges performed by an authorized Alto-Shaam service agent
during standard business hours, and excluding overtime, holiday rates or any additional fees.

The parts warranty remains in effect for one (1) year from installation or fifteen (15) months from the shipping date,

whichever occurs first.

THIS WARRANTY DOES NOT APPLY TO:

1. Replacement of light bulbs.

2. Equipment damage caused by accident, shipping, improper installation or alteration.

3. Steam generator or steam generating system damage as a result of inadequate routine maintenance and cleaning.

Required maintenance and cleaning of steam generating equipment is the responsibility of the owner/operator. 

4. Equipment used under conditions of abuse, misuse, carelessness or abnormal conditions including, but not limited

to, equipment subjected to harsh or inappropriate chemicals including, but not limited to, compounds containing
chlorine, chlorides or quaternary salts, or equipment with missing or altered serial numbers.

5. Equipment that uses water must meet Alto-Shaam’s minimum water quality standards as shown below.  USE OF

WATER NOT MEETING ALTO-SHAAM'S MINIMUM WATER QUALITY STANDARDS WILL VOID THIS WARRANTY.  
Water quality and required maintenance of steam generating equipment is the responsibility of the owner/operator.
The installation and use of Alto-Shaam’s CombiGuard™ Water Filtration System is highly recommended.

6. Damage caused by use of any cleaning agent other than Alto-Shaam’s Combitherm

®

Oven Cleaner including, but not

limited to, damage due to chlorine, bleach, quaternary salts, scouring powders or other harmful chemicals.  Use of
Alto-Shaam’s Combitherm Cleaner on Combitherm ovens is highly recommended.

7. Any losses or damage resulting from malfunction, including loss of product or other consequential or incidental

damages of any kind.

8. Equipment modified in any manner from original model, substitution of parts other than factory authorized parts,

removal of any parts including legs, or addition of any parts.

THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,

INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL ALTO-SHAAM BE LIABLE FOR LOSS OF USE, LOSS OF REVENUE OR PROFIT, OR LOSS OF PRODUCT,
OR FOR ANY INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES. 

No person except an officer of Alto-Shaam, Inc. is authorized to modify this warranty or to incur on behalf of Alto-

Shaam any other obligation or liability in connection with Alto-Shaam equipment.

ALTO-SHAAM COMBITHERM WATER QUALITY MINIMUM STANDARDS

CONTAMINANT

INLET WATER REQUIREMENTS (

UNTREATED WATER

)

Free Chlorine

Less than 0.1 ppm (mg\L)

Hardness

Less than 3 gpg (52 ppm)

Chloride

Less than 30 ppm (mg\L)

pH

7.0 to 8.5

Alkalinity

Less than 50 ppm (mg\L)

Silica

Less than 12 ppm (mg\L)

Total Dissolved Solids (tds)

Less than 60 ppm

Summary of Contents for 7.14ESG Over

































Reviews: