PHX LED Ellipsoidal
Installation & User’s Manual
PAGE 12
CLEANING / REPLACING LENSES
WARNING: Never use glass or window cleaner or any abrasive material to clean
a lens. These types of cleaners will stain the lens surface. Abrasive materials will
damage the surface of the lens.
1. Remove focus lock knob, push in safety
pin and slide lens barrel out.
2. Place barrel on a surface so that the two
halves are oriented as the top and bottom.
3. Remove lower accessory cover with (2)
screws.
4. Remove latch cover with (2) screws.
5. Remove (4) barrel screws, one on each
side.
6. Carefully remove top half of the barrel.
7. Replace or clean lenses with mild soap
and water, and a clean, lint-fee cloth.
8. Replace top half of barrel, top latch cover,
bottom cover and re-install screws.
9. Slide lens barrel back into unit and replace
focus lock knobs.
Top Latch Cover
Lens Retaining Rings
Lower Accessory Cover
Lens
Barrel Screws
Barrel Screws
36
°
(6 x 9)
26
°
(6 x 12)
19
°
(6 x 16)
50
°
(4.5 X 6)
CLEANING / REPLACING LENSES
1. Remove focus lock knob, push in safety pin
and slide the lens barrel out.
2. Place the barrel on the surface so that the
two halves are oriented as the top and bot-
tom.
3. Remove lower accessory cover with (2)
screws.
4. Remove latch cover with (2) screws.
5. Remove (4) barrel screws, one on each side.
6. Carefully remove the top half of the barrel.
7. Replace or clean lenses using instructions on
page 10 of this manual.
8. Replace top half of barrel, top latch cover,
bottom cover and re-install screws.
9. Slide lens barrel back into unit and replace
focus lock knobs.
FIXED FOCUS LENS POSITIONING
CLEANING / REPLACING LENSES
WARNING: Never use glass or window cleaner or any abrasive material to clean
a lens. These types of cleaners will stain the lens surface. Abrasive materials will
damage the surface of the lens.
1. Remove focus lock knob, push in safety
pin and slide lens barrel out.
2. Place barrel on a surface so that the two
halves are oriented as the top and bottom.
3. Remove lower accessory cover with (2)
screws.
4. Remove latch cover with (2) screws.
5. Remove (4) barrel screws, one on each
side.
6. Carefully remove top half of the barrel.
7. Replace or clean lenses with mild soap
and water, and a clean, lint-fee cloth.
8. Replace top half of barrel, top latch cover,
bottom cover and re-install screws.
9. Slide lens barrel back into unit and replace
focus lock knobs.
Top Latch Cover
Lens Retaining Rings
Lower Accessory Cover
Lens
Barrel Screws
Barrel Screws
36
°
(6 x 9)
26
°
(6 x 12)
19
°
(6 x 16)
50
°
(4.5 X 6)
