Altinex VA6835FC, User Manual

Page: 3 / 13

INTERFACES
2
PRECAUTIONS / SAFETY WARNINGS 1
Please read this manual carefully before using your
VA6835FC Interface. Keep this manual handy for
future reference. These safety instructions are to
ensure the long life of your
VA6835FC and to
prevent fire and shock hazard. Please read them
carefully and heed all warnings.
1.1 GENERAL
•
Unauthorized personnel shall not open the unit
since there are high-voltage components
inside.
•
Qualified Altinex service personnel, or their
authorized representatives must perform all
service.
1.2. SAFETY GUIDELINES FOR THE RACK-
MOUNTING OF THE VA6835FC
•
Maximum operating ambient temperature is 35
(degrees C).
•
Never restrict the airflow through the devices’
fan or vents.
•
When installing equipment into a rack, distribute
the units evenly. Otherwise, hazardous
conditions may be created by an uneven weight
distribution.
•
Connect the unit to a properly rated supply
circuit.
•
Reliable Earthing (Grounding) of Rack-Mounted
Equipment should be maintained.
1.3 INSTALLATION
•
For best results, place the VA6835FC
Interface on a flat, level surface in a dry area
away from dust and moisture.
•
To prevent fire or shock, do not expose this
unit to rain or moisture. Do not place the
VA6835FC Interface in direct sunlight, near
heaters or heat radiating appliances, or near
any liquid. Exposure to direct sunlight, smoke,
or steam can harm internal components.
•
Handle the VA6835FC Interface carefully.
Dropping or jarring can damage internal
components.
•
Do not place heavy objects on top of the
VA6835FC . If the VA6835FC is to be mounted
to a table or wall, use only Altinex made
mounting accessories, such as brackets
(
DA1293FC or DA1294FC ) and cables for
optimum setup.
•
To turn off the main power, be sure to remove
the cord from the power outlet. The power
outlet socket should be installed as close to
the equipment as possible, and should be
easily accessible.
•
Do not pull the power cord or any cable that is
attached to the VA6835FC Interface.
•
If the VA6835FC Interface is not used for an
extended period, disconnect the power cord
from the power outlet.
1.4 CLEANING
•
Unplug the VA6835FC power cord before
cleaning. Clean surfaces with a dry cloth.
Never use strong detergents or solvents, such
as alcohol or thinner. Do not use a wet cloth or
water to clean the unit.
1.5 FCC / CE NOTICE
•
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
•
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated
in a commercial environment. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and
used in accordance with the instruction
manual, may cause harmful interference to
radio communications. Operation of this
equipment in a residential area is likely to
cause harmful interference in which case the
user will be required to correct the interference
at his own expense.