Altinex Pop 'N Plug Tower PNP400, User Manual

Page: 3 / 15

DESIGNER SOLUTIONS
400-0109-006 2
PRECAUTIONS / SAFETY WARNINGS 1
Please read this manual carefully before using your
PNP400 and keep it handy for future reference.
These safety instructions are to ensure the long life
of your
PNP400 and to prevent fire and shock
hazards. Please read them carefully and heed all
warnings.
1.1 GENERAL
•
There are no user serviceable parts inside.
Qualified ALTINEX service personnel must
perform all service on the
PNP400 .
1.2 HANDLING
•
For best results, place the PNP400 on a flat,
leveled surface in a dry area away from dust and
moisture.
•
To prevent fire or shock, do not expose this unit
to water or moisture. Do not place the
PNP400
in direct sunlight, near heaters, or heat-radiating
appliances, or near any liquid. Exposure to direct
sunlight, smoke, or steam can harm internal
components.
•
Handle the PNP400 carefully. Dropping or
jarring can damage the unit.
•
Do not pull any cables that are attached to the
PNP400.
•
Do not place heavy objects on top of the
PNP400 .
•
Do not use excessive force to push down on the
top of the unit.
•
Be careful. Serious injury could result because
of the sharp edges inside of the
PNP400 .
•
To turn off main power, disconnect the power
cord powering the
PNP400 outlets.
•
We recommend using wall outlets with a Ground
Fault Circuit Interrupter (GFCI) for maximum
protection.
1.3 CLEANING
•
Unplug the PNP400 before cleaning.
•
Clean only with a dry cloth. Never use strong
detergents or solvents such as alcohol or
thinner. Do not use a wet cloth or water to clean
the unit. Do not open the unit to clean.
1.4 FCC NOTICE
•
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
•
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and if
not installed and used in accordance with
instructions found herein, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area is likely to
cause harmful interference in which case the
user will be required to correct the interference
at his own expense.
•
Any changes or modifications to the unit not
expressly approved by ALTINEX, Inc. could void
the user’s authority to operate the equipment.