DISTRIBUTION AMPLIFIERS
3
•
Any changes or modifications to the unit not
expressly approved by Altinex, Inc. could void
the user’s authority to operate the equipment.
ABOUT YOUR DISTRIBUTION AMPLIFIER
2
The
DA1406WM
is a 1-in 6-out MAC distribution
amplifier designed to connect a single computer
video source to as many as six scan rate
compatible displays. The
DA1406WM
will pass an
analog video signal up to 1.5 V p-p. Using AGC
sync circuitry, the
DA1406WM
converts incoming
TTL sync levels to a standard 4V p-p level.
All input and output connectors are 15-pin D
female. This provides superior durability, as the
pins on male connectors can be easily bent
disabling the entire unit. A male to male MAC cable
will typically be required for connection between the
computer and the input to the
DA1406WM
.
Four ID bit switches allow a user to boot up a
computer at a variety of monitor settings. Though
primarily designed for use with displays using
15-pin D (MAC-type) connectors, the
DA1406WM
can pass RGBHV, RGBS, and RGsB format
signals. Adapter cables may be necessary to
accomplish the appropriate connector change.
The
DA1406WM
is great for desktop use, but can
also be rack-mounted using optional hardware.
TECHNICAL SPECIFICATIONS
3
FEATURES/DESCRIPTION
DA1406WM
GENERAL
Input
1
Input Connector
15-pin D Female
Output
6
Output Connectors
Six 15-pin D Female
Compatibility
MAC, Power MAC,
MAC Quadra, high
resolution RGBHV,
RGBS, RGsB and
RsGsBs
Table 1.
DA1406WM
General
MECHANICAL
DA1406WM
Material
0.1” Al
Finish
Gray
Top Panel
Lexan
Height (inches)
1.75in (44mm)
Width (inches)
8.50in (216mm)
Depth (inches)
4.50in (114mm)
Weight (pounds)
2.0lbs (0.91kg)
Ship Weight (pounds)
3.2lbs (1.45kg)
T
°
Operating
10
°
C-35
°
C
T
°
Maximum
50
°
C
Humidity
90
%
non-condensing
MTBF (calculations)
40,000 hrs
Table 2.
DA1406WM
Mechanical
ELECTRICAL
DA1406WM
Input Video Signal
Analog Signal
1.5V p-p max
Impedance
75 Ohms
Input Sync Signal
Horizontal, Vertical, & C-Sync
TTL(+/-)
Sync on Green
-0.3V
Impedance
10 k Ohms
Output Video Signals
Analog Signal
Gain of 1.05 (+/-5%)
Fall/Rise Time (ns)
1.4
Impedance
75 Ohms
Output Sync Signal
Composite Sync
TTL(+/-)
Sync on Green
-0.3V
Impedance
22 Ohms
Frequency Compatibility
Typical Video Bandwidth
380 MHz
Minimum Video Bandwidth
350 MHz
Horizontal
15-200 kHz
Vertical
47-180 Hz
Coupling
DC
Cross-talk
-40dB @ 10 MHz
Power
Internal Power Adapter
90-140/200-240 V
Power Consumption
10 watts max.
Table 3.
DA1406WM
Electrical
