Compact Scaler Switcher 6x1
Altimium 13 www.altimium.com
50678%
Enable screen output adjusting
Enter Output Position
Adjust
50679%
Disable screen output adjusting
Exit Output Position Adjust
Notes:
1
Please remember to end the commands with the ending symbol “%”.
2 EDID commands are for HDMI sources only.
3 The procedure of upgrading EDID data for user:
Step1. Copy the file( the file must be named EDID.bin) to the root directory of a USB
flash disk.
Step2. Plug the USB flash disk to the
Firmware
port on its rear panel.
Step3. Send command 50769% to read EDID data from U flash disk, then, send
command 50787% to update EDID.
