Compact Scaler Switcher 6x1
Altimium 8 www.altimium.com
in auto-switching mode.
Connect HDMI3 with a source device, and then it will choose HDMI3 to output.
Remove the signal of HDMI3, SCA61E will detect from HDMI1 to VGA2. And when
it detects that HDMI2 is available, it will choose HDMI2 to output.
Cut off the power of Compact Scaler Switcher, then reboot. As the unit is in
auto-switching mode, it will choose HDMI2 to output.
4.2 RS232 Control
Here we take the software
CommWatch.exe
as example.
4.2.1 Control Software Operation
Installation
Copy the control software file to the computer connected with Compact
Scaler Switcher.
Uninstallation
Delete all the control software files in corresponding file path.
4.2.2 Basic Settings
Firstly, connect SCA61E with an input device and an output device. Then, connect it with
a computer which is installed with RS232 control software. Double-click the software
icon to run this software. The icon is showed as below:
The interface of the control software is showed as below:
