ALTHEN NM1 4L Series, Instruction Manual

Page: 6 / 20

6 | 20

4 Terminal Assignment
The electrical connections of the tilt measuring system are made via EMC cable glands to terminal
blocks inside. The terminal numbering can be found on the blocks itself. The maximum cable cross
section is 2.5 mm². The EMC-installation instruction is to be complied with.
NM1-IP-4L-12E/24E:
Clamp Description
1 Supply vUb
2 GND operating voltage
Galvanic isolation
3
Analogue output
4 GND analogue output
NM2-IP-4L-12E/24E
, Description
1 Operating vUb
2 GND operating voltage
Galvanic Isolation
3
Analogue output y-axis
4 GND analogue output
5 Analogue output x-axis
6 GND analogue output
X-axis Y-axis X-axis