5. Using a hex key (allen wrench) remove the 4
countersunk screws, which hold the fan plate to the
motor.
6. Remove back cover (fan cover) from motor.
/e illustration in step 2 shows the motor with this
cover already removed. It is secured with 3 screws
on the outside of the motor.
7. From back of motor, remove the four long
screws holding motor and plates together.
8. Set motor on back, shaE end up, on a
workbench.
9. Using a small hammer, gently tap up on the
end plate at shaE end.
10. /e plate along with the armature will come
loose which should be gently liEed out.
- 42 -
Summary of Contents for COAL GUN S130
