D000204 Rev. A
17
Adjusting Camera
settings
The Stride Smart video system will be installed by an
AlterG technician, and will be pre-programmed with our
default camera settings. These settings are based on our
color and contrast recommendations. If you wish to adjust
the camera image, click on “Cameras” (Figure 21).
Select the individual camera you want to adjust (Figure
22).
To adjust another camera, you must exit this page and
select the next camera you would like to adjust.
Reset Cameras
If any cameras freeze, they can be rebooted by entering
the camera settings page and clicking “Reset Cams”
(Figure 22). If problems persist, please contact the AlterG
support team.
Figure 22
Figure 21
