22
Figure 5-1 Block Diagram of Digital Camera Demonstration for DE4
Locate the project directory from the CD-ROM included and follow the steps below:
Directory: Demonstration / DE4_230/530_CLR
FPGA Bitstream Used: DE4_CLR.sof
1.
Ensure the connection is made correctly as shown in
X
Figure 5-2
X
. Make sure the CLR Card is
connected to
J21 (HSMC PORT B)
and DVI daughter card is connected to
J20 (HSMC
PORT A)
of the DE4 board with two
THCB-HMF2
interface cards separately which are
bundled in the DE4 kit.
2.
Insert the DDR2 memory card into J9 (DDR2 SO-DIMM-1).
3.
Connect the DVI TX output of the DVI daughter card to a DVI monitor with a DVI cable, and
the camera to
BASE1 (J2)
the CLR card with a Camera Link cable.
4.
Copy the directory DE4_230/530_CLR from CLR-HSMC System CD-ROM to the host
computer.
5.
Download the bitstream (DE4_230/530_CLR.sof) to the DE4 board.
6.
Press
BUTTON [0]
on the DE4 board to reset the circuit.
7.
User can use the
SW[0]
to set the DVI display mode. When
SW[0]
is set to Off, the DVI will
display whatever the camera captures. When set to On, the DVI will display color pattern.
