PM 740 T
page 8
of 21
File: PM740T_r3eng - Settembre 2004 - Manuale per: PM 740 T
PM 740
PM 740
PM 740 T
File: PM740T_r3eng - Settembre 2004 - Manuale per: PM 740 T
page 9
of 21
DISPLAY
1) Status indicator
Standby
Head warm up or
reset wating
Ready
Microwave ON
Alarm
2) Pulsed or continous mode
Continous Mode
Pulsed Mode
3) Control mode
Remote
External
Manual
4) Set point indicator
5) Software version
USER INTERFACE
At power on the LCD display shows the company’s logo and,
after few seconds, the unit enters in the working mode.
The unit, through the display, informs the user of its working
status, for example if pulse mode is active or not, control mode,
power set point and a user defined scale.
PARAMETERS SETUP
To modify internal unit parameters follow the menu diagram
on the next page, then read the specific instruction for every
parameter.
INFORMATION 1/3
•
Magnetron
. This indicates how many working hours the
magnetron has operated, it can be reset by the user from
the unit setup screen.
•
Unit
. This indicates how many working hours the unit has
operated, it can not be reset by the user.
•
Last Alarm
. This indicates the last alarm condition of the
unit.
•
Forward Power
. This indicates the percentage of forward
power coming from the external analog input. 10 Volts
on the analog input should be set to represent 100% of
forward power. Additional wiring and hardware is required
to implement this function.
•
Reverse Power
. This indicates the percentage of reverse
power coming from the external analog input. 10 Volts on
the analog input should be set to represent 100% of reverse
power. Additional wiring and hardware is required to
implement this function.
1
2
3
4
5