5
en
Full-featured Remote Details
Menu back button
Pop EQ button
Hip Hop EQ button
Rock EQ button
Volume increase
button
Power on/off button
Track back button
Volume decrease button
Source button
Play/pause button
Menu up button
Altec EQ button
Mute button
Menu down button
Select button
Track forward
button
NOTE
For best results, aim the full-featured remote toward the inMotion
iMT630 speaker system.
Getting Started
How to Set Up Your Speaker System
1
Lower the stand.
Lower the stand that’s on the back of your speaker system.
NOTE
Your Altec Lansing inMotion iMT630 speaker is equipped with a
unique stand that supports your speaker system when opened, and when
closed, switches off the speaker system to conserve battery power and
encloses the full-featured remote’s storage compartment.
2
Place the speaker system on a hard surface.
Place your Altec Lansing inMotion iMT630 speaker system on a desk,
bookshelf, counter, or other hard surface.
3
eject the dock connector.
Depress and release the dock connector. It’s on the front of the
speaker system with the Altec Lansing logo on it. The dock connector
will extend into position.
WARNING
In order to prevent accidentally dropping your iPhone or iPod,
be sure to remove it from the dock connector before picking up the speaker
system.
How to Install the AC Adapter
4
Connect the AC adapter cable plug
into the speaker system’s jack.
The jack is located on the back of
the system behind the stand/remote
storage compartment door.
5
Plug the AC adapter into the wall
outlet.
