10
If you have a non-docking portable audio device, you can enjoy it through
your Altec Lansing inMotion iMT630 speaker system as well. Just connect it
via the AUX jack. Here’s how:
1
Locate a 3.5mm stereo cable (not included).
2
Plug one end of the stereo cable into your device.
Your device should have either a headphone or LINE OUT jack for
you to plug into.
3
Plug the other end of the stereo cable into your speaker
system’s AUX jack.
The AUX jack is located on the back of the speaker system behind
the stand/remote storage compartment door.
4
Turn on your device.
5
Turn on your speaker system.
6
Select your audio source: AUX.
7
Find your desired song.
How to Listen to Your non-docking
Portable Device
How to navigate the iPod Menu on Your
iPhone or iPod
In iPod mode, you can use the navigation keys on the remote to choose
songs from your music library:
Press the “MenU
” button to scroll down within a menu
screen.
Press the “MenU
” button to scroll up within a menu screen.
Press the “MenU
” button to go up a menu level.
Press the “SeLeCT” button to make a selection within a menu.
How to Charge Your iPhone or iPod
Whenever your iPhone or iPod is docked and your Altec Lansing inMotion
iMT630 speaker system is plugged into an AC outlet, your iPhone or iPod is
charging (until fully charged)—even if the speaker system is switched off.
