11
Wireless Snooze Remote Features (M402SR model only)
1
Open the battery compartment.
Use a coin or screwdriver to turn the
battery compartment door counter-
clockwise.
2
Position the battery (included) so it
sits in the battery holder correctly.
Make sure the polarity (the + and –
sides of the battery) is correct.
3
Replace the battery door.
NOTE
Please discard used batteries properly.
How to Connect and Pair the Wireless Snooze Remote
1
Connect the snooze remote
receiver to the SNOOZE REMOTE
jack.
The jack is located on the back of the
system (M402SR model only).
2
Press the PAIRING button on the
snooze remote receiver until the
LED light stays lit.
3
Press any button on the wireless
snooze remote twice.
The LED light on the snooze remote receiver will turn off once the
pairing process is complete.
NOTE
Any time a button on the wireless snooze remote is pressed, the
LED light on the snooze remote receiver will flash.
The wireless snooze remote lets you operate select functions of your Altec
Lansing FPO NAME speaker system from across the room. There’s no need
to aim it at the speaker system.
Snooze
Press the
button
to activate the snooze
timer.
Play a track from your iPod
In iPod mode, press the button. See the
Listening to Your iPod
section for more
information.
Pause your iPod
In iPod mode, press the button.
Turn off the alarm
Press the ALARM 1 or ALARM 2 button
when the alarm is sounding.
NOTE
See the
Using the Wireless Snooze
Remote
section for installation and pairing
instructions.
Using the Wireless Snooze
Remote (M402SR model only)
The M402SR model comes with a wireless
snooze remote that allows you to snoozw and turn off your alarm (and play/
pause your iPod) from across the room – up to 30 feet (10 meters) away.
In order for the wireless snooze remote to control the speaker system, the
snooze remote receiver must be connected to the back of the speaker
system and paired with the wireless snooze remote.
How to Install the Wireless Snooze Remote Battery
The wireless snooze remote battery (included) is not installed at the factory.
To install the wireless snooze remote battery, follow the steps below:
ANTENN
A
SNOOZE
REMO
TE
