Altair MTX-416, Owner'S Manual

Page: 15 / 22

15 MTX-416 - PROGRAMMABLE 4x16 INTERCOM MATRIX
One of the five LED associated to the switches, remains lighting, indicating the memory in
which it is located the unit. If the working memory and the stored memory are the same, the LED
will remain without blinking, and if the working memory and the stored memory are different, the
LED will be blinking.
By means of these five keys it is possible to be acceded of direct mode to the five stored
memories, always considering that when recovering a stored memory, the working memory will
be lost.
Mediante estas cinco teclas se puede acceder de manera directa a las cinco memorias
almacenadas, siempre teniendo en cuenta que al recobrar una memoria guardada, la memoria
de trabajo se perderá.
It exists a memories bank for the NORMAL mode and other for the REVERSE mode, reason
why five memories for each mode can be recorded.
When acceding to a determined memory, if the system were linked with other MTX-416 units,
they will change all the connected units, to the memory number to which we have acceded.
MEMORY STORE SWITCH
The store switch allows us to record the working memory on anyone of the five
memories (M1-M5) available in the system.
When pressing the STORE switch, display will indicate
M1-5 blinking, the five leds of the direct memory recall
switches will begin to blink, as well as the LED
corresponding to the STORE switch, being indicated that we
are in recording mode.
The unit reset the recording mode if we do nothing or press a switch other than STORE, M1 —
M5, in a few seconds.
If we pressed one of the direct memory recall switches (M1-M5), the working memory will be
recorded in the memory number corresponding to the pressed key.
When the memory is recorded, the unit change to the memory number on which we have
recorded the working memory, reason why if the system were linked with other MTX-416 units, all
the connected units will change to the memory number on which the working memory has been
recorded.
MEMORY PREVIEW SWITCH
With this PREVIEW switch we can see the memories recorded directly in display
When pressing the PREVIEW switch, display will indicate M1-5 blinking, the five leds
of the direct memory recall switches will begin to blink, as
well as the LED corresponding to the PREVIEW switch, being
indicated that we are in preview mode.
The unit reset the preview mode if we do nothing or
press a switch other than STORE, M1 — M5, in a few
seconds.
If we pressed one of the direct memory recall switches (M1-M5), the corresponding memory
will appear in the display blinking, as well as it will continue blinking the PREVIEW switch. Passed a
few seconds, the system will return to normal mode.