9
Altai Technologies Ltd. All rights reserved
Quick Setup Guide
MIS200P switch also supports auto MDI/MDI-X operation. Therefore, you can
use either straight-through or crossover cables to connect the switch with
any other network devices. For simplicity, it is recommended to use straight-
through cables. For details of wiring for a straight-through or crossover cable
using T568B specification, see
Appendix C and D
.
Each port comes with two LEDs: Link and PoE to show its working status. For
details, see
Section F and G
respectively.
B: Copper Ports (G9-G10)
2 extra ports of 10/100/1000BASE-T RJ-45 type for data transmission. The
connection is the same as to the PoE ports (G1-G8). It is recommended to
use the following types of Ethernet cable for the connection. Cable run is up
to 100 meters.
•
Cat. 5/5e/6
•
UTP/STP
•
T568B wiring standard
•
straight-through type
Each port comes with two LEDs: 100 and 1000 to show the Ethernet speed.
For details, see
Section H
.
