19
Altai Technologies Ltd. All rights reserved
Quick Setup Guide
9.
Fault Relay
MIS200P supports fault relay, which consists of contacts 5 and 6 of the
terminal block, to indicate the power fault event.
Insert two wires (size: 12
–
18 AWG) into the relay contacts. When power fault
occurs, the two wires attached to the relay contacts form an open circuit. If
the switch is under power on condition, i.e. no fault occurs, the two contacts
are shorted together and forms a closed circuit, which accepts current
capacity of 1A at 24 VDC.
