17
Altai Technologies Ltd. All rights reserved
Quick Setup Guide
2.
Use a small flat-blade screwdriver to tighten the wire-clamp screws for
preventing the wires from loosening.
3.
Insert the terminal block into the receptor. Use the flat-blade screwdriver
to lock the terminal block to the MIS200P unit in place.
4.
Connect the positive and negative DC wires to a power source(s).
5.
Turn on the power source(s). When the PWR LED light is up and becomes
steady, the unit should be operating as normal.
Note: The actual wiring color code shall follow the regulations of your own
country/region.
Positive DC Wire (Red)
Negative DC Wire (Black)
DC
Power 2
DC
Power 1
