TPS13-001_rev1_4_A8n_series_Installation_Guide_for_FCC.doc
Commercially Confidential
23
Figure 27. Wrap the Butyl Rubber Strip
Figure 28. Butyl Rubber Ring Finished
Connecting RF Cables
1.
Make sure each RF cable and its connectors are absolutely dry.
2.
Loosely connect all the RF cables from each RF port. Do not tighten up any of the
connections.
3.
Secure the RF cable bundles to the pole.
4.
Tighten the RF cable connectors around the A8n series 5GHz antenna ports with a torque
wrench to the proper torque limit to ensure that correct internal seals and surface contacts are
made. If a torque wrench is not available, first tighten the connector to finger tight, then
tighten it with a wrench for an additional ⅛ to ¼ turn from the finger tight position.
