TPS13-001_rev1_4_A8n_series_Installation_Guide_for_FCC.doc
Commercially Confidential
15
3.2
Mounting A8n and A8in on Pole
1.
Assemble the mounting kit according to Figure 12 with one side of the screw installed.
2.
Mount the kit to the pole at the desired height and tighten all 4 screws to fix its position
(Figure 13).
3.
The mounting kit must be installed with the key hole pointing direction (Figure 14).
4.
Clamp the unit to the mounting kit, as shown in Figure 15 and make sure the mounting
screw is locked in the key hole.
5.
Screw in 4 locking screw to secure A8in with the mounting kit (Figure 15).
6.
The mounting kit will fit with pole diameter from 1 inch to 3 inches.
Figure 12 Mounting kit assembly
Figure 13 Completion of Mounting Kit
Figu
re
14
mou
ntin
g
scre
w
lock
ing
dire
ctio
n
Figure 15 Clamping and secure the unit on pole
