manualshive.com logo in svg

ALTAI A3-Ei, Installation Manual

Share
Download
ALTAI A3-Ei Installation Manual Download Page 5

 

v 

Altai Technologies Ltd. All rights reserved 

 

Altai A3-Ei Dual-band 3x3 802.11ac Wi-Fi Access Point 

Installation Guide 

Warning 

 

The  user  is  advised  to  keep  apart  from  the  base-station  and  antenna 
with at least 45cm when the base-station is in operation. 
 
A3-Ei requires professional installation. 
 
The  user  is  advised  to  keep  apart  from  the  base-station  and  antenna 
with at least 45cm when the base-station is in operation. 
 
Please  install  a  lightning  arrestor  to  protect  the  access  point  for 
lightning  dissipation  during  rainstorms.  Lightning  arrestors  are mounted 
outside  the  structure  and  must  be  grounded  by  means  of  a  ground 
wire to the nearest ground rod or item that is grounded. 
 

Disclaimer 
 

All  specifications  are  subject  to  change  without  prior  notice.  Altai 
Technologies  assumes  no  responsibilities  for  any  inaccuracies  in  this 
document  or  for  any  obligation  to  update  information  in  this 
document.  This  document  is  provided  for  information  purposes  only. 
Altai  Technologies  reserves  the  right  to  change,  modify,  transfer,  or 
otherwise revise this publication without notice. 
 

Summary of Contents for A3-Ei

























Reviews:

No comments

Brands by name

Popular brands

Load more brands