Altai Technologies Ltd. All rights reserved
A8n Series Super WiFi Base Station Installation Guide
TPS13-002_rev1.0
Figure 3-2 A8n and A8in Base Station Package
3.2.
Mounting A8n and A8in on Pole
1.
Assemble the mounting kit according to Figure 3-3 with one side of the screw
installed.
2.
Mount the kit to the pole at the desired height and tighten all 4 screws to fix its
position (Figure 3-4).
3.
The mounting kit must be installed with the key hole pointing direction (Figure 3-5).
4.
Clamp the unit to the mounting kit, as shown in Figure 3-6 and make sure the
mounting screw is locked in the key hole.
5.
Screw in 4 locking screw to secure A8in with the mounting kit (Figure 3-6).
6.
The mounting kit will fit with pole diameter from 1 inch to 3 inches.
Figure 3-3 Mounting kit assembly
