9. Maintenance and Fault Finding
GEM80-400
Page 9-34
ALSPA GEM
80-400 SERIES CONTROLLERS TECHNICAL MANUAL
Issue 3 04/99
Any faulty modules should be returned for repair to:
Special Products and Repairs Dept,
ALSTOM DRIVES & CONTROLS
West Avenue,
Kidsgrove,
Stoke-on-Trent,
ST7 1TW
England.
Tel: ++44 (0) 1782 781128
Fax: ++44 (0) 1782 781041
Where user repair is required on a PCB, further information on PCB repair may be
obtained on request, but when PCBs are repaired by the user, ALSTOM DRIVES &
CONTROLS cannot accept any responsibility for faults which may arise.
Faulty modules or units for repair, should be returned in packing which includes
antistatic bags next to the electronic circuitry. Where possible the original
packing should be used.
CAUTION...
IF A COMPLETE SUBRACK IS TO BE SHIPPED, ANY POWER MODULE SHOULD BE
REMOVED FROM THE SUBRACK AND PACKED SEPARATELY. CEGELEC INDUSTRIAL
CONTROLS LTD CANNOT ACCEPT RESPONSIBILITY FOR ANY MECHANICAL DAMAGE
TO THE SUBRACK IF IT IS SHIPPED WITH POWER MODULES FITTED.
