ALWAYS READ INSTRUCTIONS BEFORE USING POWER LIGHTS
WARNING
WARNING
• Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
precautions may result in serious personal injury.
• The warnings, cautions, and instructions in this manual cannot cover all possible conditions or situations that could occur. Exercise
common sense and caution when using this tool. Always be aware of the environment and ensure that the tool is used in a safe and
responsible manner.
• Do not allow persons to operate or assemble the product until they have read this manual and have developed a thorough under
standing of how it works.
• Do not modify this product in any way. Unauthorized modification may impair the function and/or safety and could affect the life of
the product.
• Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger industrial equipment. There are
certain applications for which this equipment was designed. This product will be safer and do a better job at the capacity for which it
was intended.
• DO NOT use this equipment for a purpose for which it was not intended.
• Industrial or commercial applications must follow OSHA requirements.
• Risk of electrical shock, do not use in the environment with gas, combustible or explosive materials, hot objects.
• Use only under the recommended voltage and frequency requirements.
• The specification in this manual is based on standard lab testing, different environment may influence the data.
• Charge the light which has battery every 3 months if not in constant using, and after each use, if it is used often to ensure
longevity.
• Replace the battery with manufacture and battery designation only.
• Do not look directly in the light during operation of this unit. This can be harmful to the eyes ever for a brief period due to the intense
light.
• DO NOT handle this light or try to plug in charger when your hands are wet or damp or when you are standing on a wet damp
surface or water in water, always keep the plug dry.
• DO NOT use in potentially dangerous locations such as, flammable or explosive atmospheres.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC STATEMENT
CAUTION-PRODUCT USE AND CARE
• Before connecting light to a power supply, always check to ensure the power supply corresponds to the voltage on the nameplate of
the light (100-240V AC). A power supply with a voltage greater or lower than that specified can result in serious injury to the user, as
well as damage the light. If in doubt, do not plug in the light.
• This machine must be grounded while in use to protect the operator from electrical shock. This unit is equipped with an electrical
cord that has an equipment grounding conductor and a grounding plug. The plug MUST be plugged into a matching receptacle that
is properly installed and grounded in accordance with ALL local codes and ordinances.
• Do not force the product. Products are safer and do a better job when used in the manner for which they are designed. Plan your
SPX10K1C
ADVANCED LIGHTING SYSTEMS
