14
14.6.3 Cancelling sensor (wireless room temperature sensor/transmitter)
Press the “Cancel sensor” button. Within 15 seconds, the training button on the sensor (001, 002, 003 or 004 function types)
now has to be pressed and/or the cancel function (020 function type) has to be started. Alternatively, you can select the
desired sensor on the configuration interface of the b@home gate and thereby cancel off.
If sensors are cancelled, note that if there are no longer any transmitters trained with the 001, 002, 003 or 020
function type, a trained actuator will shift to emergency mode. More information about emergency mode can be
found in the respective actuator operating instructions.
More information about the training button and/or triggering the cancel function on the sensor can be found in the
relevant operating instructions.
i
Gate
App
Training button on sensors
FTRFB-280.119
FTRFB-280.120
with housing closed.
The cancel function can be selected on the
FTRCUd-210.021 b@home control unit in
the settings menu and started by pressing
the button under .
OK
.
i
Training button on sensors
FTRFB-280.101
FTRFB-280.119
FTRFB-280.120
with housing open.
Transmit log-on
telegram?
Exit
OK
