4. Insert one end of each of the silver and bronze poles into
the eyelets at the pegout points (3), push the poles into
the sleeves from the other end, silver poles first, then
bronze. Push the gold poles up and fix to pegout points.
It does not matter which of the eyelets the poles go into.
6. Place the tent outer over the top of the inner canopy and
connect outer tent to pegout points using the buckles.
7. Tension the tent by adjusting the buckles at the pegout
points; peg and tension the guylines as required (6).
8. Happy camping!
CONTINUE THE JOURNEY
When your partnership with this product is over
please don’t leave it hidden in a cupboard, never to
see another adventure. Wash it, pass it on, give to a
friend, sell it, donate it to charity, make it into some-
thing else or recycle it and let someone else live their
dream.
5. Clip the plastic poleclips on the inner to the poles (4) and
the central ridge clips to the gold pole’s hubs (5).
CARE AND MAINTENANCE
◉
Clean and dry tent thoroughly after each use.
◉
Never use a washing machine or tumble dryer to clean
your tent. Car washes are also frowned upon.
◉
Spot clean with mild detergent and warm water.
◉
Air dry only.
◉
Pack tent carefully to avoid punctures.
◉
Avoid prolonged UV exposure.
FIELD REPAIRS
◉
If you are unlucky enough to rip your tent, duct tape or
StormSure Tough Tape will do the trick for field repairs.
◉
If a pole breaks, use a splint or pole sleeve as a tempo-
rary repair.
SPECIFICATION
Sleeps: 3 - 4
Outer: 40D Si/PU Nylon ripstop
Inner: 20D Nylon ripstop
Floor: 70D/210T
Poles: DAC NSL Featherlite Green
Pegs: 20 pegs; Aluminium
Buckles: Duraflex
Zips: YKK
Fig 5
Fig 6
HACK, PATCH & SEW
In store service for your kit: alpkit.com/stores
For more ideas on how you can extend the life of your
outdoor products visit: alpkit.com/continuum
Fig 4
Fig 3
