Chevrolet/GMC
FULL SIZE TRUCK
20/31
2
Using a 18mm socket, remove the bolts under the rear
seat bench.
The number of bolts vary on some vehicles.
During installation process, torque the seat
bench to 50Nm (33ft/lb).
3
The seat bench is in two sections and held together by
10mm bolts. Remove the two bolts holding the two bench
sections together.
Direction of the bolts varies on some vehicles.
3
Carefully remove the seat bench sections from the
vehicle by lifting the seats up and away from the
back wall.
Caution: the seat bench sections are heavy
and have sharp edges in back and below which
could cause injury.
Removing the Child Seat Restraint Cable Loops and Rear
Window Panels
Remove the three (3) Child seat restraint cable loop by
using a T-47 Torx wrench on the Torx bolts.
During installation process, torque the child seat
tether to 35 Nm (26ft/lb).
Removing Rear Window Panel
1
Remove the back covers by unclipping the seat
bench panels.
There are slight differences between model year vehicles
and options.