23
-EN
3
The traffic event information on the route that you
selected is displayed.
When there are more than one pieces of the traffic
event information, move the
Flipper switch
up or down
to select the further information you want to know.
Press the
OK
button or
MODE
knob to execute the
selection.
4
Further information is displayed.
When there are more than one piece of the further
information, move the
Flipper switch
up or down to
display any further information.
Tip
While receiving the TMC and displaying your vehicle’s
position, press the OK button for more than two seconds to
display the traffic event information on the route that you
have set. If there is no information on the route that you
have set, all other receiving information is displayed.
Setting Dynamic Route Seek
1
In RDS-TMC Information Menu, move the
Flipper
switch
up or down to select "Dynamic Nav."
Press the
OK
button or
MODE
knob to execute the
selection.
2
The display changes to "Dynamic Nav." setting.
Move the
Flipper switch
up or down to select "On" or
"Off."
Press the
OK
button or
MODE
knob to execute the
selection.
3
When you set to ON, a message regarding an evasion
route is displayed while guiding the current route.
Move the
Flipper switch
up and down to select "Yes,"
then press the
OK
button or
MODE
knob to execute
the selection. The unit seeks for a route in
consideration of the traffic event given through the
RDS-TMC information and new guidance will be given.
Note
When you set to OFF, the unit performs an initial seek for a
route without consideration for any traffic event given through
the RDS-TMC.
Setting the RDS-TMC Voice Guidance
to Interrupt the Radio or CD, etc.
1
In the RDS-TMC Information menu, move the
Flipper
switch
up and down to select "Guide."
Press the
OK
button or
MODE
knob to execute the
selection.
2
The display changes to the "Guide" setting display. Move
the
Flipper switch
up or down to select "On" or "Off."
On
: TMC voice guidance will activate
Off
: No TMC voice guidance
3
Press the
OK
button or
MODE
knob to execute the
selection.
Selecting TMC Reception (Only when
TMC-001P is connected)
1
In RDS-TMC information Menu, move the
Flipper
switch
up and down to select "Set up RDS-TMC."
Press the
OK
button to execute the selection.
2
The display changes to "Set up RDS-TMC."
Move the
Flipper switch
up and down to select
“Country” or "Station."
Press the
OK
button or
MODE
knob to execute the
selection.
3
Move the
Flipper switch
to select the name of the
country or station you selected in step 2.
Press the
OK
button or
MODE
knob to execute the
selection.
If you select "Auto," a station will be selected and
received automatically.
Note
If you select stations or countries listed as receivable in the list
while you are in the area where these stations are not receivable,
the TMC receiving is not functioned.
If the optional RDS-TMC receiver box TMC-001P is
connected, reception of TMC can be set for either
"Country" or "Station."
Summary of Contents for NVD-T003
Page 31: ......