background image

14

-EN

RCA INPUT
 ANALOG 1

Ai-NET IN
ANALOG2

CHANGER IN

ANALOG3

CD

DIGITAL1

CHANGER

DIGITAL2

DVD

DIGITAL3

DISPLAY

INPUT

(L)

(R)

FUSE

15A

BATTERY

POWER SUPPLY

GND

CENTER

GUIDE INPUT

SUBWOOFER

REAR

FRONT LOW

FRONT MID

FRONT HIGH

OUTPUT

(L)

(R)

Battery

Input Side

Output Side

Front Tweeter Output (L)
Front Tweeter Output (R)
Front Mid Range Output (L)
Front Mid Range Output (R)

Front Mid Bass Output (L)

Front Mid Bass Output (R)
Rear Output (L)
Rear Output (R)
Subwoofer Output (L)
Subwoofer Output (R)

Center Output

Blue/White

Blue

Orange

White/green

White/green

Ai-NET Cable (Included with CD Changer)

Ai-NET Cable (Included)

Ai-NET Compatible

CD Changer

★★

CDA-7990R

Head Unit

EQ

    

/DIV

System Switch

To External Amplifier

Fiber Optic Cable (Sold Separately)

Fiber Optic Cable (Sold Separately)

To the vehicle's small light cable

Not used in this system

Not used

Not used in this system

To External Amplifier Remote ON Cable

Connect to a metal part of 
chassis body with a screw.

Remote OUT Cable

Remote ON Cable

Illumination Cable

Guide Control Cable 1

Guide Control Cable 2

Grounding Cable (Sold Separately)

Battery Power Cable (Sold Separately)

NOTES

When connecting a Optical
Digital CD Changer

★★

When connecting a Optical
Digital CD Changer, change the
Digital/Analog switch of the CD
Changer to “2” (Digital Output)

1

2

NOTES

For the ground cord (sold separately) and battery power cord (sold sepa-
rately), pass the wires through the included terminal board cover before
connecting them to the PXA-H900. After this, mount the terminal board cover
on the PXA-H900.

If the ground cord (sold separately) and battery power cord (sold separately)
are only wires (if they do not have terminals), refer to “Installing with wires
only (no terminals)” (page 18) to install.

Please observe the following when using Fiber Optic Cable.

Do not coil the Fiber Optic Cable smaller than a 30mm radius.

Do not place anything on top of the Fiber Optic Cable.

• PXA-H900 + CDA-7990R Head Unit + CD C External Amplifier

Examples of system expansion

Summary of Contents for Multimedia Manager PXA-H900




















Reviews: