34
-EN
When using discs containing both audio data and MP3/WMA/AAC
data.
Setting item: FILE PLAY MODE
Setting contents: CD / CMPM
•
Insert the disc when playback is stopped and remove the disc from
the unit before setting.
•
When an MP3-compatible CD changer is used, this setting cannot be
applied.
Setting item: DivX INFO.
If [
] of DivX INFO. is touched, a DivX
®
file registered
code is displayed.
Radio Setup Operation
1
Touch
[SETUP]
on the main source screen.
The SETUP selection screen is displayed.
2
Touch
[SOURCE SETUP]
.
The SOURCE SETUP screen appears.
3
Touch
[
]
of RADIO SETUP.
The RADIO setup screen appears.
4
Touch
[
]
or
[
]
of the desired item to change its
setting.
Setting items:
RDS CLOCK DISP / FM LEVEL / PI SEEK / RDS REGIONAL /
PTY LANGUAGE / PTY31
5
Touch
[
]
to return to the previous screen.
Touch and hold
[
]
for at least 2 seconds to return to the
main source screen that was displayed before the setup
operation was started.
When ON is selected, the clock is adjusted automatically based on the
time data sent from the RDS broadcast.
Setting item: RDS CLOCK DISP
Setting contents: OFF / ON
If the difference in volume level between the CD and FM radio is too
great, adjust the FM signal level as follows.
Setting item: FM LEVEL
Setting contents: LOW / HIGH
Playing MP3/WMA/AAC Data (FILE PLAY
MODE)
CD:
Plays only the audio data on discs containing both
audio data and MP3/WMA/AAC data.
CMPM:
Plays only the MP3/WMA/AAC files on discs containing
both audio data and MP3/WMA/AAC data.
Displaying DivX
®
Disc Information
RADIO Setup
The Parking Brake must be engaged to access the RADIO
mode screen. Attempting to access this screen while driving
will display the warning-CAN’T OPERATE WHILE DRIVING.
The following steps 1 to 5 are common operations to each
“Setting item” of Radio Setup. Refer to each section for details.
RDS Time Display
OFF:
To adjust it manually.
ON:
Adjust the clock automatically based on the time data. In
this case, the clock cannot be adjusted manually.
Adjusting Source Signal Levels
