Alpine INE-W987D, Quick Reference Manual

Page: 5 / 184

ALPINE X800D-U QRG 68-24567Z45-A (EN)
3
-EN
Owner’s manual Touch operation, Location of Controls, Turning Power On or Off
Getting Started
Touch operation
You can operate the system by using the touch panel on the screen.
Common onscreen buttons
:
Returns to the previous screen. Depending on the function, this button may cancel the operations
performed on the screen.
: Closes
the window.
Location of Controls
e
DER
EL OR
etc., and
VIGATION
OR
FE
Any route
traffic
driving
Failure
al
product.
ine Service
XPERTS.
ical skill
here you
HEM
r than
securely
e resulting
INCHED
e seat rails)
mage to the
grommet
dge of the
URE OR
moisture
esult in
NT PANEL
he product.
A
RESET switch
The system of this unit is reset.
B
(My Favourites) / button
The My Favourites screen for registered User1 or User2
is displayed.
Press and hold this button at least 3 seconds to switch
to climate screen. You can check the air condition, etc.,
when this unit is connected to the car’s CAN Interface
box.
C
/ (DOWN/UP) button
Press to adjust the volume.
D
MUTE/
C
button
Press to activate/deactivate the mute mode. Press and
hold this button for at least 3 seconds to turn the
power off.
E
/AUDIO button
Displays the Audio/Visual screen. If the Audio/Visual
screen is already displayed, changes the source. Press
and hold this button for at least 3 seconds to activate
the “Easy Sound Setup” mode.
F
(MAP) button
Recalls the navigation map screen.
Press again to switch to Navigation menu screen.
Press and hold this button for at least 3 seconds to
change to Go Home route screen. If the Home is not
set yet, it will change to Home setting screen.
G
(PHONE) button
Recalls the Telephone Menu screen.
When a hands-free phone with Voice Recognition is
connected, press and hold for at least 3 seconds to recall
the Voice Recognition mode.
H
a
/
d
button
Press to seek down/up station in radio mode or down/
up track, chapter, etc., in other audio/visual source.
I
c
(Eject) button
Recalls the Open/Tilt screen.
If the disc does not eject after touching [
c
] of DISC,
press and hold this button for at least 5 seconds.
J
Remote Sensor
Point the remote control transmitter towards the
remote sensor within a range of 2 metres.
The illustration is for X800D-U. •
Turning Power On or Off
1
Turn the ignition key to the ACC or ON position.
The system is turned on.
2
Press and hold the MUTE/
C
button for at least 3 seconds to turn the power off.