background image

8

INSTALL THE PRODUCT CORRECTLY SO THAT THE DRIVER CANNOT WATCH 
TV/VIDEO UNLESS THE VEHICLE IS STOPPED AND THE EMERGENCY 
BRAKE IS APPLIED.

It is dangerous for the driver to watch TV/Video while driving a 
vehicle. Installing this product incorrectly enables the driver to 
watch TV/Video while driving. This may cause a distraction, 
preventing the driver from looking ahead, thus causing an accident. 
The driver or other people could be severely injured.

DO NOT WATCH VIDEO WHILE DRIVING.

Watching the video may distract the driver from looking ahead of 
the vehicle and cause an accident.

DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY 
FROM SAFELY DRIVING YOUR VEHICLE.

Any function that requires your prolonged attention should only be 
performed after coming to a complete stop. Always stop the vehicle 
in a safe location before performing these functions. Failure to do so 
may result in an accident.

DO NOT FOLLOW ROUTE SUGGESTIONS IF THE NAVIGATION SYSTEM 
INSTRUCTS YOU TO PERFORM AN UNSAFE OR ILLEGAL MANEUVER, OR 
PLACES YOU IN AN UNSAFE SITUATION OR AREA.

This product is not a substitute for your personal judgment. Any 
route suggestions by this system should never supersede any local 
traffic regulations or your personal judgement or knowledge of safe 
driving practise.

KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE 
NOISES WHILE DRIVING.

Excessive volume levels that obscure sounds such as emergency 
vehicle sirens or road warning signals (train crossings, etc.) can be 
dangerous and may result in an accident. LISTENING AT LOUD 
VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING 
DAMAGE.

MINIMIZE DISPLAY VIEWING WHILE DRIVING.

Viewing the display may distract the driver from looking ahead of 
the vehicle and cause an accident.

DO NOT DISASSEMBLE OR ALTER.

Doing so may result in an accident, fire or electric shock.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may 
result in fire, etc.

KEEP SMALL OBJECTS SUCH AS SCREWS OUT OF THE REACH OF 
CHILDREN.

Swallowing them may result in serious injury. If swallowed, consult 
a physician immediately.

USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.

Failure to do so may result in fire or electric shock.

DO NOT BLOCK VENTS OR RADIATOR PANELS.

Doing so may cause heat to build up inside and may result in fire.

USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.

Use for other than its designed application may result in fire, 
electric shock or other injury.

MAKE THE CORRECT CONNECTIONS.

Failure to make the proper connections may result in fire or 
product damage.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY 
TERMINAL.

Failure to do so may result in electric shock or injury due to 
electrical shorts.

DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING 
OBJECTS.

Arrange wiring and cables in compliance with the manual to 
prevent obstructions when driving. Cables or wiring that obstruct 
or hang up on places such as the steering wheel, shift lever, brake 
pedals, etc. can be extremely hazardous.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other 
equipment. Doing so will exceed the current carrying capacity of 
the wire and result in fire or electric shock.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.

When drilling holes in the chassis for installation, take precautions 
so as not to contact, damage or obstruct pipes, fuel lines, tanks or 
electrical wiring. Failure to take such precautions may result in fire.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO 
MAKE GROUND CONNECTIONS.

Bolts or nuts used for the brake or steering systems (or any other 
safety-related system), or tanks should NEVER be used for 
installations or ground connections. Using such parts could disable 
control of the vehicle and cause fire etc.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE 
OPERATION, SUCH AS THE STEERING WHEEL OR SHIFT LEVER.

Doing so may obstruct forward vision or hamper movement etc. 
and results in serious accident.

Summary of Contents for INE-F409E


















































































Reviews: