ALPINE iLX-F509E 68-41657Z84-A (EN)
ALPINE iLX-F509E 68-41657Z84-A (EN)
58
-EN
Sampling rate
This value shows how many times per second the data is
sampled (recorded). For example, music CDs use a
sampling rate of 44.1 kHz, so the sound is sampled
(recorded) 44,100 times per second. The higher the
sampling rate, the higher the sound quality, but also the
larger the volume of data.
Encoding
Converting music CDs, WAVE (AIFF) files, and other
sound files into the specified audio compression format.
Tag
Song information such as track titles, artist names,
album names, etc., written into MP3/WMA/AAC/FLAC/
WAV/APE (USB flash drive) files.
Root folder
The root folder (or root directory) is found at the top of
the file system. The root folder contains all folders and
files. It is created automatically for all USB flash drives.
In Case of Difficulty
If you encounter a problem, please turn the power
off, then on again. If the unit is still not functioning
normally, please review the items in the following
checklist. This guide will help you isolate the
problem if the unit is at fault. Otherwise, make sure
the rest of your system is properly connected, or
then consult your authorized Alpine dealer.
Basic
No function or display.
•
Vehicle’s ignition is off.
– If connected according to the instructions, the unit will
not operate with the vehicle’s ignition off.
•
Improper power lead connections.
– Check power lead connections.
•
Blown fuse.
– Check the fuse on the battery lead of the unit; replace
with the proper value if necessary.
No sound or unnatural sound.
•
Incorrect setting of volume/balance/fader controls.
– Readjust the controls.
•
Connections are not properly or securely made.
– Check the connections and firmly connect.
Screen not displayed.
•
Brightness/Contrast control is set at the minimum
position.
– Adjust the Brightness/Contrast control.
•
Temperature in the vehicle is too low.
– Increase the vehicle’s interior temperature to operation
temperature range.
•
Connections to the Auxiliary Device are not securely
made.
– Check the connections and firmly connect.
•
The Parking Brake Lead is not connected.
•
The Parking Brake is not engaged.
– Connect the Parking Brake Lead, then engage the
Parking Brake.
Movement of displayed picture is abnormal.
•
Temperature in the vehicle is too high.
– Allow the vehicle’s interior temperature to cool.
Radio
Unable to receive stations.
•
No antenna, or open connection in the antenna cable.
– Make sure the antenna is properly connected; replace
the antenna or cable if necessary.
tions in the seek mode.
eak signal area.
e the tuner is in Seek mode.
ou are in is a primary signal area, the antenna
rounded and connected properly.
our antenna connections; make sure the
operly grounded at its mounting location.
y not be the proper length.
e the antenna is fully extended; if broken,
tenna with a new one.
.
oper length.
tenna fully; replace it if it is broken.
ly grounded.
e the antenna is grounded properly at its
tion.
nal is weak and noisy.
e solution does not work, tune in another station.
erate.
tion.
or the condensation to dry.
.
ttery power is weak.
ttery power and wiring.
y malfunction if the battery power is under
.)
our phone, the ringtone volume may be
e.
essage Appears
e displayed on the screen during
n addition to the messages telling you the
tus or providing guidance for the next operation,
ollowing error messages. If one of these
yed, carefully follow the instructions
olumn.
erate while driving.
ation, etc., was carried out while the vehicle
.
ehicle to a safe location, stop, and engage
king brake, then carry out this operation.
orted.
ive with a hub is connected.
y back from a USB flash drive with a hub.
onnections are also not supported.
