Jeep Wrangler
i509-WRA-JL
20220401v1
26/29
Setting Up OEM Aux Switches
1
Once in the setup menu (see page 28) go to the Maestro screen and select SETUP.
2
Select MAESTRO SETUP then VEHICLE FEATURES (not pictured). (Note this path in the settings can vary
slightly with different Maestro firmwares).
3
Select AUX SWITCHES.
4
Select the switch that you would like to edit (AUX 1, AUX 2, AUX 3, or AUX 4).
5
Select the setting you would like to edit (TYPE, POWER SOURCE, or RECALL LAST STATE).
6
TYPE can be set for either LATCHING or MOMENTARY. LATCHING means that when the switch is selected it
will stay on until the switch is pressed again. MOMENTARY will only keep the switch on as long as the button
is held in.
7
RECALL LAST STATE when set to ON the state of the switch is retained across ignition cycles.
8
POWER SOURCE menu can be set for either BATTERY or IGNITION. BATTERY means the switch has power to
it at all times. IGNITION means it has power only when the vehicle is on.
3
4
5
6
7
8
1
2