background image

Jeep Wrangler

i207-WRA

20201016v1

˜

 2/19

Types of Precautions

Forbidden

Indicates actions that are forbidden 

(must not be performed)

Mandatory

Indicates actions that are 

mandatory (must be performed)

Forbidden

Indicates that disassembly is 

forbidden. 

Marks content that should receive 

your full attention. 

 Warning

Do not disassemble or modify the product. Doing so could lead to an accident, fire,  

or electric shock. 

 

Forbidden

Store screws and other small objects where small children cannot reach them. If one of these 

small objects is swallowed, consult with a doctor immediately. 

 

When replacing fuses, be sure to use fuses with the specified current rating. Failing to do so could 

lead to an accident or fire. 

 

 

Forbidden

  

Mandatory

Only connect the product to a 12 VDC negative ground car. Failing to do so could lead to  

an accident or fire. 

 

Mandatory

Before you begin wiring, remove the ground wire from the negative terminal of the battery.  

Failing to do so could lead to electric shock or injury. 

Do not cut the insulation on a cord and take power from another device. Doing so could  

lead to fire or electric shock. 

 

Forbidden

Do not install the product in a location where it will obstruct the driver’s forward view;  

interfere with the operation of the steering wheel, gearshift, or the like; or pose a  

threat to passengers. Doing so could lead to an accident or injury. 

Forbidden

When making a hole in the vehicle body, be careful to avoid damaging pipes, the fuel tank, 

electrical wiring, and the like. This kind of damage could lead to an accident or fire. 

Summary of Contents for i207-WRA




















Reviews: