Jeep Wrangler
i207-WRA
20201016v1
11/19
Disconnecting the Uconnect® (only for 2011-2017 vehicles with factory Uconnect®)
1
Remove the factory climate control panel. It is
clipped on and can be removed with a panel
removing tool. Extract the (2) 7mm bolts from
Uconnect® module.
3
Secure the Uconnect® module to the original
location using the 7mm bolts.
2
Disconnect the 24pin OEM connector.
NOTE:
Since the factory Uconnect® system is
not going to be used you can unplug the 24 pin
connector shown in step 2. If Uconnect® module is
not disconnected the Uconnect® system will stay
paired with previously paired phones. The user’s
phone may connect to both Bluetooth devices
simultaneously resulting in unpredictable and
potentially distracting behavior.
Connecting A SiriusXM Module (Sold Separately)
There is no way to integrate the factory SiriusXM
tuner. Once the radio is removed, the factory
SiriusXM is removed. As the title states, SiriusXM
requires a tuner sold separately. This diagram
shows how to integrate the antenna connection.
For vehicles with factory SiriusXM connect
the adapter to the factory SiriusXM antenna in
the radio cavity. The factory SiriusXM antenna
is located on the passenger side B-pillar.
For vehicles without factory SiriusXM use
the antenna that is included with the SXV300
SiriusXM Tuner.
SXM/DAB
CAN I/F
USB
HDMI IN
HDMI OUT
POWER
W. REMOTE
PRE OUT
GPS
SiriusXm
connect
