Setup
80
-
EN
Select this when connected to a wide screen TV. This is selected upon shipment
from the factory.
Before performing each setting, please refer to “DVD setup menu chart”
on page 74 and “DVD setup standard operation” on page 75.
Changing the TV screen settings
Use the procedure described below to set the output screen according to the type of TV monitor
being used.
GROUP:
TV SCREEN
Setting item: 4:3LB/4:3PS/16:9
Select this when connected to a conventional 4:3 size (normal TV aspect ratio)
monitor. There may be black stripes visible at the top and bottom of the screen
(when playing a 16:9 size movie). The width of these stripes will depend upon
the original aspect ratio of the theatrical release of the movie.
Select this when connected to a conventional 4:3 size monitor. The picture will
fill the entire TV screen. However, due to the mismatch in aspect ratio, parts of
the movie at the extreme left and right sides will not be visible (when playing a
16:9 size movie).
4:3 LETTER BOX
Supplement
See page 89 for supplementary information.
4:3 PAN-SCAN
16:9 WIDE
130.com.ua
Autogood products internet store http://130.com.ua
